10
42683-01 • 09/11/09 • Hunter Fan Company
6-5. Run the thin white antenna wire from the receiver through one
of the slots in the ceiling plate. (For best reception, make sure
the end of the antenna is exposed at the top of the canopy.)
6-6. Connect the green ground wires from the ceiling plate and the
downrod to the ground wire from the ceiling with a large wire
connector.
6-7.
Push all wires and wire connectors back through the ceiling
plate hole into the outlet box. Place the green and white wires
on a separate side of the outlet box from the other wires.
6 • Wiring the Fan (continued)
To Next Page
Loading...
