To Next PageTo Next Page
Need help?Do you have a question about the Hunter 20715 and is the answer not in the manual?
General| Type | Ceiling Fan |
|---|---|
| Model | Hunter 20715 |
| Blade Span | 52 inches |
| Number of Blades | 5 |
| Motor Type | AC |
| Control Type | Pull Chain |
| Light Kit | No |
| Light Kit Included | No |
| Number of Speeds | 3 |
| Mounting | Standard |
| Reversible Motor | Yes |
| Mounting Type | Downrod |
| Finish | Brushed Nickel |
| Warranty | Limited Lifetime |
Introduction to the Hunter ceiling fan and manual overview.
Essential safety instructions and warnings before installation and use.
Guidelines for selecting an appropriate and safe location for the ceiling fan.
A checklist to determine if an existing fan site is acceptable and safe.
Instructions for cutting the correct size ceiling hole for installation.
Steps for installing a support brace and the outlet box securely.
Steps for preparing and securing the fan's electrical supply line.
Details on Hunter's 3-position mounting system: Low Profile, Standard, and Angled.
Information on optional accessories like wall-mounted or remote speed controls.
Key tasks to ensure readiness before starting ceiling fan installation.
List of necessary tools for installing the ceiling fan.
Instructions for unpacking and checking fan parts for damage or missing items.
Steps for drilling pilot holes and threading lead wires through the hanger bracket.
Procedure for aligning and securely attaching the hanger bracket to the ceiling structure.
Steps to assemble the fan, including attaching the canopy and downrod.
Procedure for safely hanging the fan assembly onto the installed hanger bracket.
Instructions for assembling the fan for low profile mounting.
Steps to attach the low profile washer and canopy securely.
All wiring must follow national and local electrical codes.
Detailed instructions for connecting ceiling and fan wires for single or dual switch setups.
Steps to raise and secure the canopy to the hanger bracket.
Procedure for attaching and securing the canopy trim ring.
Instructions for inserting blade grommets into the fan blades.
Steps for attaching fan blades to the blade irons using assembly screws.
Information on Dust Armor protection and cleaning painted/wood blades.
Steps to attach the upper switch housing to the mounting plate.
Instructions for connecting the motor plug to the lower switch housing.
Steps to align and attach the lower switch housing to the upper housing.
Instructions for removing plastic from shades and installing them.
Guidance on installing the correct type and wattage of light bulbs.
Note regarding US federal energy regulations restricting light output.
How to operate the fan and light using pull chains and speed settings.
Explanation of how to change airflow direction for warm and cold weather.
Recommendations for cleaning fan finishes, painted, and wood blades.
Steps to diagnose and fix issues where the fan does not operate.
Solutions for noisy fan operation and excessive wobbling.
Troubleshooting tips for lights shutting off and CFL bulb flickering.
Contact information for obtaining parts or service assistance.
