Hunter 20715 - Completing Installation with Light Fixture (Continued); Installing Light Shades; Installing Light Bulbs; Light Output Restriction Note

14
45028-01 • 02/15/11 • Hunter Fan Company
7 • Completing Your Installation With a Multi Staked Light Fixture (Continued)
Note: In compliance with US federal
energy regulations, this ceiling
fan contains a device that
restricts its light output.
Exceeding the wattage limit
marked on the MAX wattage
sticker axed to the light
socket(s) may result in re
hazard or improper operation.
8-7. Remove the plastic from each of the shades.
8-8. Install the shades.
8-9. Install four Type B light bulbs (40 Watt maximum each).
Steps 8-8 – 8-9
Shade
Light Bulb
Remove the protective wrap
from the silhouette on the
motor housing before starting
the fan.