Hunter 30445 - Operation; Maintenance; Cleaning the Unit

©2012 Hunter Fan Company
7
Using Your Air Purifier (continued)
CLEANING THE UNIT:
WARNING! To avoid serious injury from electric shock ALWAYS turn the
air purier OFF and disconnect the plug from the outlet BEFORE cleaning.
Maintenance
OPERATION:
OFF - Unit off
LOW speed - Recommended for use when soft
background noise is unwanted.
MED speed - Typical usage setting. Soft
background noise is not an issue.
HI speed - Use when quick, efficient results
to a room’s air quality are desired.
The fan speed can be adjusted at any time by
rotating the dial so the dial indicator aligns with
the desired speed.
Press the UVC On/Off button to turn on and off
the UVC function of your air purier.
NOTE: The UVC indicator is a blue light that
lets you know that the UVC bulb is working.
Figure 6
UVC On/Off
Speed control
ON/OFF
UVC Indicator
Dial Indicator
Clean the outside of the unit with a soft, damp cloth. The rear grill can be
cleaned in soapy water after it has been removed from the unit and the pre-
lter has been removed.
NOTE: Ensure the grill is completely dry before reinstalling it on the unit. Failure to
do so could cause damage to the lters or motor.