To Next PageTo Next Page
Need help?Do you have a question about the Hunter 386 and is the answer not in the manual?
Details on how to register your boat's warranty.
Information about the terms and conditions of the Hunter warranty.
A brief overview of the history and background of Hunter Marine.
Definitions for common sailing terminology used in the manual.
Clarification of symbols and labels used throughout the manual.
Essential tips for safe operation of the boat.
A comprehensive checklist to perform before departing.
Guidance on creating and filing a float plan.
Tasks to complete after finishing a sailing session.
Instructions for docking and anchoring the vessel.
Operation and basic maintenance of the diesel engine.
Introduction to the boat's electrical systems.
Information on the safe operation of the cook stove.
Instructions for using and maintaining the boat's toilet.
Guidelines for opening and securing hull ports.
Details on the operation of various pumps on board.
How to operate the boat's fresh water system.
Guidelines for managing and discharging waste.
Practices to minimize environmental impact while boating.
Instructions for preparing the hull for bottom painting.
Maintenance guidelines for the engine and drivetrain.
Information on maintaining and adjusting boat compasses.
Procedures for maintaining the steering system.
Maintenance tasks for the boat's electrical systems.
Maintenance of the boat's plumbing and water systems.
Care and maintenance of the boat's fuel systems.
General advice for maintaining the boat's condition.
Guidelines for cleaning and caring for fabric surfaces.
Methods to prevent electrolysis and manage galvanic protection.
Procedures for maintaining teak wood surfaces.
Steps for storing and winterizing the boat.
Information regarding the boat's certifications.
Safety precautions related to lightning strikes.
Details on the boat's rigging and sail dimensions.
Specifications on the boat's overall dimensions and capacities.
Diagram of the deck layout and hardware placement.
A detailed list of deck hardware components.
Layout of the boat's interior accommodation spaces.
Instructions on how to operate the dinette table.
Location and identification of lifting points on the hull.
Diagram illustrating the running rigging setup.
Specific information regarding the mainsheet rigging.
Instructions for installing the boat's arch.
Details concerning the boom and sail reefing systems.
Specifications for the running rigging components.
A general description of the boat's rigging.
Diagram illustrating the standing rigging setup.
Specific information about the mast spreaders.
Specifications for the standing rigging components.
Details on how standing rigging is attached.
Step-by-step instructions for tuning the boat's rigging.
Information and diagrams related to the spinnaker system.
Information specific to the engine compartment.
Details concerning the propeller shaft and propeller.
Details and operation of the potable water system.
Information on the boat's waste management system.
Description and operation of the bilge pumping system.
Details on through-hull fittings, seacocks, and valves.
Information and maintenance for the fuel system.
Details concerning the propane gas system.
Comprehensive details on the boat's electrical system.
Information and maintenance for the steering system.
Description of the boat's anchoring setup.
An index to help locate specific topics within the manual.
Reference to the owner's manual for the engine.
Information on knotmeter and depth sounder instruments.
Details and operation of the VHF radio.
General information regarding the boat's compass.
Manual for the boat's stereo system.
Manual for the sail furling system.
A guide covering various aspects of marine rigging.
Instructions for maintaining the boat's winches.
Guidelines for maintaining the steering system.
Information provided by the sail manufacturer.
Information about the water strainer component.
Details regarding the bilge pump.
Manual for the boat's toilet system.
Manual for the boat's cooking stove.
Manual for the hot water system.
Manual for the microwave oven.
Information for other miscellaneous equipment.
Field for recording the boat's Hull Identification Number.
Field for recording the name of the yacht.
Field for recording the owner's name.
Field for the owner's street address.
Fields for owner's city, state, country, and ZIP code.
Field to record the boat's designated home port.
Fields for engine model, serial number, and propeller size.
Field for the dealer's phone number.
Field for the dealer's street address.
Fields for dealer's city, state, country, and ZIP code.
Warranty covering defects in workmanship and materials for one year.
Warranty for hull integrity and protection against blisters.
Limitations and conditions not covered by the warranties.
A short biography of Warren R. Luhrs, founder of Hunter Marine.
Definitions for sailing terms starting with A, B, C, and D.
Definitions for sailing terms starting with E through M.
Definitions for sailing terms starting with N through Y.
Indicates extreme hazard with high probability of death or injury.
Denotes a hazard that can result in injury or death.
Reminds of safety practices or draws attention to potential hazards.
Advice on preparing for safe boating excursions.
List of essential safety equipment for the boat.
Importance and proper use of life jackets.
Details on fire extinguishers and their use.
Proper use and handling of pyrotechnic flares.
Risks of operating a boat under the influence of drugs/alcohol.
Actions to take before starting a voyage.
Safety practices to follow during navigation.
Safe procedures for fueling the diesel engine.
Step-by-step instructions for starting the engine.
Procedures for operating the engine while motoring.
Further details and safety precautions for the electrical system.
Safety precautions and operation of the cooking stove.
Guidelines to prevent and manage fuel and oil spills.
Procedures for discharging and disposing of waste.
Information on engine exhaust emissions and tuning.
Considerations for using anti-fouling paints and regulations.
Safe use and disposal of cleaning chemicals.
Steps for preparing and painting the boat's bottom.
Information on applying an epoxy barrier coat to the hull.
Maintenance and operational guidelines for the engine.
Lubrication and maintenance for the transmission.
Information on the stuffing box and its maintenance.
Information on compass adjustment and deviation tables.
Regular inspection and maintenance of the steering system.
Maintenance of batteries, terminals, and wiring.
Checking pumps, hoses, clamps, and thru-hull valves.
Inspection of fuel lines, filters, and tank for leaks and water.
Procedures for cleaning and waxing fiberglass.
Care instructions for acrylic components.
Guidelines for maintaining and storing sails.
Maintenance of fittings, blocks, and other hardware.
Recommendations for winch cleaning and greasing.
Regular cleaning and stain treatment for vinyl surfaces.
Care for vinyl, leather, and fabric upholstery.
Procedures for repairing surface and deep scratches on floors.
Maintenance for teak wood interior surfaces.
Steps for renewing and polishing oiled teak surfaces.
Instructions for repairing scraped or abraided woodwork.
Sealing and protecting teak interior wood.
Steps for repairing damaged woodwork finishes.
Standard Operating Procedure for polyurethane floor finishes.
Proper folding, stowing, and maintenance of sails for storage.
Disconnecting battery and storing electronics.
Advice on storing cushions to prevent mildew.
Protecting hatches from ice and damage during storage.
Procedures for winterizing the water system.
Winterizing the toilet and holding tank systems.
Proper storage procedures for an outboard engine.
Winterizing procedures for the inboard engine.
Important checklist items for leaving the boat unattended.
Recommendations for routine maintenance based on usage and time.
Categories defining craft design and usage limits per directive.
Information on compliance with NMMA standards.
Details of the standard standing rigging configuration.
Details of the furling standing rigging configuration.
Detailed view of the upper spreader assembly.
Detailed view of the lower spreader assembly.
Specifications for the conventional standing rigging.
Specifications for the furling standing rigging.
Layout diagram for optional hardware and spinnaker.
List of optional deck gear components.
Basic operating instructions for the boat's engine.
Schematic showing the layout of the engine compartment.
Instructions for opening the engine box.
How to operate the boat's fresh water system.
Diagram showing the fresh water system drain layout.
Basic schematic of the fresh water system.
Detailed diagram of the forward vanity water system.
Detailed diagram of the galley water system.
Detailed diagram of the cockpit shower water system.
Layout of the standard waste system.
Layout of the electric overboard waste system.
Layout diagram for the sump pump system.
Layout diagram for the main bilge pump system.
Layout diagram for the manual bilge pump.
Schematic of the sump pump system.
Schematic of the electric bilge pump system.
Diagram showing locations of through-hull fittings.
Diagram showing locations of through-deck fittings.
Schematic of the engine fuel system.
Schematic of the generator fuel system.
Index of sections covering A.C. and D.C. electrical systems.
Details on A.C. power systems, including troubleshooting.
Details on D.C. power systems, including troubleshooting.
General
