Need help?Do you have a question about the Hunter 44134 and is the answer not in the manual?
General| Power Source | Battery |
|---|---|
| Stages | 1 Heat/1 Cool |
| Hold Function | Yes |
| Display | Digital |
| Type | Digital |
| Voltage | 24 Volt |
| Battery | 2 x AA Alkaline |
| Temperature Range | 40°F - 90°F |
Indicates low battery power; replace AA batteries to avoid system interruptions.
Signals the need to check or replace the furnace filter; reset counter on page 26.
On multi-stage heat pumps, shows when the second stage heat is active.
Allows programming and settings changes off the wall for user convenience.
Prevents rapid cycling by delaying system restart for up to 4 minutes after shutdown.
Restores factory settings by holding '+' and '-' buttons for 3 seconds.
Solutions involve checking battery position and charge to resolve blank screen.
Verify time, Save Away mode, and correct day settings for proper schedule execution.
Check HG/HE switch and fan setting to ensure it's not set to off.
To Next Page
