Hunter 44668 User Manual

Gather all tools necessary to complete your installation
before removing the old thermostat.
To install your thermostat you should have the
following tools:
Slotted Screwdriver
Phillips Screw Driver
Electric Drill and 3/16” drill bit
Hammer
Four 1.5v (AA) size alkaline batteries
Unpack your new Hunter
®
thermostat and ensure all
components are present in the Accessory Pack. This
includes:
2 - #8 slotted screws
2 - wall anchors for mounting
1 - sheet of terminal labels
1 - jumper wire
1 - thermostat with mounting plate.
Before you Begin
44668 ThermosTaT
This guide will make installation and programming
your new thermostat simple and fast. In just a few
minutes, you can have the Comfort Saver with Room
Control installed, programmed and ready to go. Videos
showing each step of installation and programming
are available at www.hunterfan.com/comfortsaver. Of
course, if you have additional questions, please call
our help line at 1-888-830-1326 from 7:00 am to 7:00
pm Monday – Friday or 8:00 am to 5:00 pm (Central)
on Saturday. You may also contact us online at www.
hunterfan.com.
©2009 Hunter Fan Company 43078-01 • 12/18/08

Hunter 44668 Specifications

General

Programmability	7-Day Programmable
Temperature Control Accuracy	±1°F
System Switch	Heat, Cool, Off
Color	White
Power Source	Battery
Stages	1 heat, 1 cool
Display Type	Digital
Compatibility	Gas, Oil, Electric
Hold Feature	Yes
Filter Change Reminder	Yes
Fan Control	Auto, On
Backlight	Yes

Summary

How to Uninstall Old Thermostat and Install New Hunter Thermostat

Removing Your Old Thermostat

Instructions for safely removing the existing thermostat from the wall.

Installing Your New Hunter Thermostat

Steps for mounting the new thermostat base and connecting wires.

How to Program

Setting Current Time and Day

Guide to setting the current time and day of the week on the thermostat.

Setting Weekday/Weekend Programming

Instructions for configuring weekday and weekend heating/cooling schedules.

Setting Individual Day Programming

How to program each day of the week individually for personalized comfort.

Setting Everyday Programming

Method to apply the same 4 program periods across all seven days.

Setting Home Today and Hold

Using 'Home Today' and 'Hold' features for temporary or permanent temperature settings.

Setting-Up the Remote Sensor

Instructions for installing and configuring the remote temperature sensor.

Programming the Remote Sensor

How to make the thermostat use the remote sensor for room-specific control.