OPEN RAW WATER PICKUP SEACOCK
"SHORE POWER B" CABLES MUST BE HOOKED UP.
IS RUNNING WHEN ON SHORE POWER, BOTH "SHORE POWER A" AND
IF ANY OTHER APPLIANCES ARE TO BE USED WHEN AIR CONDITIONER
PROGRAMMING/TROUBLESHOOTING INSTRUCTIONS
CHECK AIR COND. SEA STRAINER, CLEAN IF NECESSARY
TURN ON A.C. MAIN (BUS "B") BREAKER ON MAIN A.C. PANEL
CHOOSE POWER SOURCE (SHORE POWER OR GENERATOR) SEE PAGES 63A-2
IF THERE IS NO POWER AT PANEL WHEN CONNECTED TO SHORE POWER,
TURN ON UNIT AT THERMOSTAT DISPLAY PANEL AND SET TEMP.
SEE AIR CONDITION MANUAL FOR DETAILED OPERATING
CHECK MAIN BREAKERS IN AFT CABIN, ON THE STRBD HEADLINER
NOTE:
OPTIONAL AIR CONDITIONING SYSTEMS
BASIC OPERATING INSTRUCTIONS:
MAKE SURE THAT DISCHARGE VALVE IS OPEN
63B-1
4268063B-1
NONE
1
2
3
4
5
To Next Page
Loading...
