A AFT LIFTING POINT (INDICATED BY DECAL)
PLACEMENT IS FOWARD OF THE HULL WINDOWS
SO AS TO ALIGN WITH INTERIOR STRUCTURAL
SUPPORT PROVIDED BY BULKHEADS. ALSO
BE SURE YOU ARE WELL FORWARD OF
PROP SHAFT.
B FWD LIFTING POINT (INDICATED BY DECAL)
PLACEMENT IS FWD OF CHAINPLATE SO AS
TO ALIGN WITH INTERIOR STRUCTURAL
SUPPORT PROVIDED BY FWD SALON
BULKHEAD.
NOTE: TO AVOID DAMAGING THE RUBRAIL WHEN LIFTING
THE BOAT, A 14" PIECE OF 4" X 4" WOOD SHOULD BE
PLACED IN BETWEEN THE LIFTING STRAP AND THE HULL,
JUST BELOW THE RUBRAIL
41B
To Next Page
Loading...
