Hunter 50257 - Downrod Installation Details; Downrod Insertion and Securing

www.HunterFanInternational.com
KEEP!
20 cm
(8”)
1 cm
(3/8”)
C
U
T
&
S
T
R
I
P
(not to scale)
Remove the pre-installed
setscrew so that the downrod
can be inserted.
Hand tighten the downrod (at
least 4-5 full turns) until it stops.
The wires can be cut, but
leave at least 8” extending
from the top of the downrod.
Downrod (continued)
20 cm
(8”)
1 cm
(3/8”)
Tighten the setscrew
with pliers. DO NOT
HAND TIGHTEN.
If the setscrew is not tightened
securely, the fan may fall.
K
E
E
P
!
7
MB529-01 • 11/15/16 • © 2016 Hunter Fan Company