Need help?Do you have a question about the Hunter 50378 and is the answer not in the manual?
Details on flat, angled, and vaulted ceilings, including downrod and mounting kit needs.
Secures the ceiling bracket using machine screws and washers to the outlet box.
Secures the ceiling bracket using wood screws and washers to support structure.
Steps for preparing, feeding, tightening, and securing the downrod assembly.
Place the downrod ball into the slot in the ceiling bracket.
Connects fan wires to ceiling wires for a single switch setup.
Connects fan wires to ceiling wires for a dual switch setup.
Insert canopy screws to secure the canopy to the bracket.
Attach blade washers and blade screws to secure each blade.
Partially install light kit screws, connect wiring, and tighten.
Install LED bulbs and attach the glass globe securely.
Feed pull chains and attach pendants to fan and light switches.
Locate and slide the reversing switch to change fan direction (updraft/downdraft).
Checks for power, pull chains, switch, breaker, and wiring connections.
Ensures blades are installed correctly and uses balancing kit.
Checks blade installation and for cracked blades.
Steps to remove the standard downrod pipe and reassemble with a new one.
To Next Page
General
