To Next PageTo Next Page
Need help?Do you have a question about the Hunter 50392 and is the answer not in the manual?
General| Model | 50392 |
|---|---|
| Type | Ceiling Fan |
| Blade Span | 52 inches |
| Number of Blades | 5 |
| Motor | WhisperWind |
| Number of Speeds | 3 |
| Control Type | Pull Chain |
| Finish | Brushed Nickel |
| Remote Control Included | No |
| Reversible Motor | Yes |
| Light Kit Included | Yes |
| Indoor/Outdoor Use | Indoor |
| Warranty | Lifetime |
Install ceiling bracket using machine screws and washers into an approved outlet box.
Secure ceiling bracket with wood screws and washers into support structure using pilot holes.
Follow steps to install the downrod, securing the setscrew and managing wires.
Slide canopy over downrod and wires, then place downrod ball into the ceiling bracket slot.
Connect ceiling, receiver, and fan wires (black, white, yellow, blue, ground) according to the diagram.
Lightly attach blade arms to the motor with screws, then securely tighten.
Align blade holes with iron posts, squeeze together for proper assembly.
Change fan direction (downdraft/updraft) by sliding the reversing switch inside the light fixture.
