Need help?Do you have a question about the Hunter 51019 and is the answer not in the manual?
Lists essential tools like ladder, screwdriver, pliers, wire strippers, and optional tools like a drill.
Details all parts and hardware included in the fan box for installation, including screws, wires, and fan pieces.
Ensures proper clearance from blades to walls and floor, and checks ceiling suitability for mounting.
Guides on mounting for flat, angled, or vaulted ceilings, including necessary accessories.
Details two methods for attaching the ceiling bracket: using machine screws or wood screws.
Instructions on how to slide the canopy and seat the downrod ball into the ceiling bracket slot.
Step-by-step guide for connecting fan wires to house wiring for a single wall switch setup.
Step-by-step guide for connecting fan wires to house wiring for dual wall switch setups.
Instructions on fitting the canopy and securing it with canopy screws, ensuring proper alignment.
Guide on aligning blade holes with iron posts and securing blades to the fan motor assembly.
Steps to connect switch housings, secure them with screws, and attach the light fixture.
Guidance on installing light bulbs and securing glass shades to the light fixture.
Instructions for feeding pull chains through the housing and attaching pendants for fan speed and light control.
Explains how to use the reversing switch to change airflow direction between updraft and downdraft.
Addresses issues like fan not working, excessive wobbling, and noisy operation with solutions.
Details what the motor and other fan parts are covered for, how to obtain service, and exclusions.
Step-by-step visual guide on how to remove the standard downrod and reassemble with a new downrod pipe.
To Next Page
General
