Hunter 51019 - Installing the Canopy and Blades; Securing the Canopy; Attaching Fan Blades

7
8
1886
1886
Ceiling Bracket Downrod Hanging Fan Wiring Canopy Blades Light Glass/Bulbs
Canopy Screw
Installing the Canopy
2 of 2
Lift the canopy into place so that
the screw holes are aligned.
Insert the two canopy screws
found in the hardware bag.
F
i
t
t
h
e
c
a
n
o
p
y
i
n
p
l
a
c
e
a
s
s
h
o
w
n
.
bag
Canopy Screw
Installing the Blades:
Repeat x5
Fan style may vary.
Note:
Installing the Bulbs and Glass
Assembling the Light
The ared tops of the blade iron posts will be fully
visible above the blade when properly assembled.
Align the three blade holes with the three
blade iron posts. Squeeze the blade and
the blade iron post together.
NOTICE
If screw holes do not align
properly then rotate the canopy
180 degrees. Hanger ball shape
must match canopy opening for
correct canopy installation.