Need help?Do you have a question about the Hunter 51379 and is the answer not in the manual?
General| Model | 51379 |
|---|---|
| Type | Ceiling Fan |
| Blade Span | 52 inches |
| Motor Type | WhisperWind |
| Number of Blades | 5 |
| Control Type | Pull Chain |
| Mounting | Standard |
| Motor Speed | 3-Speed |
| Reversible Motor | Yes |
| Room Size | Large |
| Mounting Type | Downrod |
| Warranty | Limited Lifetime |
Instructions to read and save for safety and reference.
Crucial safety warnings regarding electrical shock, injury, and proper installation.
Important cautions related to wiring, FCC rules, and device compliance.
Lists essential tools required for fan installation, including optional ones.
Expert advice on identifying hardware bags and parts for assembly.
Details the parts and hardware included in the fan package for assembly.
Notes the inclusion of extra fasteners for convenience.
Indicates that fan style may vary.
Specifies clearance requirements for fan blades relative to walls and floor.
Emphasizes the need to secure the fan to a fan-rated outlet box or structure.
Guides on selecting mounting type based on ceiling angle, standard or angled.
Provides guidance for installing fans on angled or vaulted ceilings, including accessory needs.
Offers a method to determine the need for an angled mounting kit based on ceiling slope.
Essential safety step to disconnect power before installation.
Instructions for mounting the bracket using machine screws to an outlet box.
Instructions for mounting the bracket using wood screws into a support structure.
Advice on orienting the bracket for angled ceilings.
Notes on the origin of the machine screws used for mounting.
Action to remove the pre-installed setscrew from the downrod.
Instructions for passing wires and hand-tightening the downrod onto the motor.
Information about the length of the ground wire.
Instructions for tightening the setscrew with pliers and trimming wires.
Critical warning about ensuring the setscrew is properly tightened to prevent fan detachment.
Guides on how to position the canopy onto the downrod and wires.
Important notice on how to lift the fan to prevent damage.
Visual confirmation of the fan's assembly progress.
Lists the necessary wire nuts for connecting wires.
Step-by-step wiring instructions for a single-switch setup.
Detailed instructions for securely connecting wires using wire nuts.
Critical warning about ensuring the fan is grounded to prevent shock.
Advice on managing and routing excess wires within the outlet box.
Step-by-step wiring instructions for a dual-switch setup.
Guides on how to position the canopy correctly.
Instructions for securing the canopy using specific screws.
Explains how to use washers with blade screws for secure blade attachment.
Indicates the repetition of the blade installation step for all blades.
Crucial note about following blade instructions for proper fan function.
Initial step for attaching light kit components with specific screws.
Guides on connecting wire harnesses and color-coded wires for the light kit.
Instructions for routing wires and attaching the switch housing.
Warning to ensure all screws securing the trim ring are tight to prevent fan detachment.
Final steps for securing the switch housing and plate with screws.
Instructions for installing light bulbs into the fan's sockets.
Guides on correctly attaching the glass globe to the light kit.
Critical warning to ensure the glass is securely attached to prevent injury.
Essential safety step to disconnect power at the outlet and switch.
Instructions for opening the battery compartment and replacing batteries.
Detailed steps for connecting the wall control wires to the switch box and fan.
How to mount the wall control unit using screws.
Steps for attaching the decorative wall plate to the control.
Resuming power after installation is complete.
Table detailing remote control button functions for lights and fan speed.
Information on remote pairing and re-pairing procedures.
Guidance to consult the remote function card for detailed operation.
Instructions to download the specific app from app stores.
Step to open the downloaded application.
Guidance to follow app instructions for fan setup.
Information on where to find the HomeKit setup code for the fan.
Advice on when to install the app if not done immediately.
Tip regarding app installation timing relative to power cycling.
Introduction to the process of changing the downrod length.
Steps for disassembling the existing downrod assembly.
Visual aid showing the unassembled downrod components.
Steps for assembling the downrod with a new or replacement pipe.
Critical safety warning about following downrod assembly instructions precisely.
Visual representation of the correctly assembled downrod.
Common issues and solutions when the fan fails to operate.
Troubleshooting steps for excessive fan vibration and wobbling.
Solutions for common noise issues during fan operation.
Steps to resolve issues with erratic remote control performance.
Guidance for resolving interference problems with multiple remotes or fans.
Advice on safely cleaning fan components to prevent damage.
Procedure for requesting warranty service and necessary documentation.
Details the limited lifetime warranty coverage for the fan motor.
Outlines the one-year limited warranty for other fan parts.
Information on warranty coverage for light kit components.
Summary of what is covered under the fan's warranty terms.
List of exclusions from the fan's warranty coverage.
Explanation of how state laws may impact warranty rights.
To Next Page
