Need help?Do you have a question about the Hunter Kennicott 51114 and is the answer not in the manual?
Essential safety warnings, cautions, and instructions to follow before installation.
List of tools needed for proper fan assembly and installation.
Overview of all parts included in the fan box and their identification.
Checks for adequate clearance from blades to walls and floor, and secure outlet box.
Guidance on mounting for flat, angled, or vaulted ceilings, including kit requirements.
Methods for securing the ceiling bracket using machine or wood screws.
Step-by-step process for attaching the downrod, including safety warnings.
How to safely lift and place the fan assembly onto the ceiling bracket.
Important notice on how to properly lift the fan housing or downrod.
Connecting wires for a single switch setup, including grounding and electrical codes.
Steps to fit and attach the canopy to the ceiling bracket.
Procedure for inserting blades and securing them with screws and washers.
Aligning and fastening the cap to the fan housing.
Step-by-step guide for connecting and installing the wall control unit.
Ensuring power is off before commencing wall control installation.
How to use the reverse switch to change fan rotation for updraft or downdraft.
Guidance on troubleshooting fan not working, wobbling, or noisy operation.
Details on what the warranty covers, exclusions, and how to obtain service.
Step-by-step instructions for replacing the standard downrod with a different length.
Critical safety advice for preventing fan fall hazards during downrod replacement.
To Next Page
General
