Need help?Do you have a question about the Hunter 53310 and is the answer not in the manual?
General| Type | Ceiling Fan |
|---|---|
| Blade Span | 52 inches |
| Number of Blades | 5 |
| Motor Speeds | 3 |
| Reversible Motor | Yes |
| Control Type | Pull Chain |
| Remote Control Included | No |
| Energy Star Certified | No |
| Indoor/Outdoor | Indoor |
| Finish | Brushed Nickel |
| Model | 53310 |
| Motor Type | AC |
| Warranty | Lifetime Motor Warranty |
| Blade Pitch (Degrees) | 13 |
Contact details and resources for installation assistance.
Critical safety precautions to prevent injury, shock, and ensure proper handling.
List of essential tools needed for standard fan installation.
Additional tools required for specific mounting situations.
Detailed list of fan components and hardware provided in the box.
Explanation of symbols used to identify specific hardware bags.
Minimum clearance needed from blades to walls and floor for safe operation.
Ensuring the outlet box is rated for fan support and securely mounted.
Guidance for flat, angled, or vaulted ceiling installations.
Details on using machine screws or wood screws for bracket attachment.
How to orient the bracket for angled ceiling installation.
Critical safety advice for securing the ceiling bracket.
Steps for preparing and inserting the downrod, including wire management.
Instructions to properly tighten the downrod setscrew.
Important safety reminder to properly tighten the downrod setscrew.
Sliding the canopy over the downrod and wires.
Placing the downrod ball into the ceiling bracket slot.
Important advice on how to safely lift the fan assembly.
Procedure for connecting wires using a single switch setup.
Procedure for connecting wires using a dual switch setup.
Critical warnings about grounding and electrical codes compliance.
Steps for fitting and fastening the canopy to the ceiling bracket.
Tip for rotating the canopy if screw holes do not align.
Securing blades to blade arms using grommets and screws.
Fastening the blade arms to the fan motor.
Steps to mount housings and connect wiring for the light kit.
Procedure for inserting bulbs and securing the glass globe.
Critical warnings for secure light kit and glass shade installation.
Steps to feed pull chains through the switch housing and attach pendants.
Procedure to adjust the reversing switch for desired airflow.
Solutions for problems like fan not working, wobbling, or noisy operation.
Advice on cleaning the fan to prevent damage.
Information on obtaining warranty service and what is covered.
Details on conditions and damages not covered by the warranty.
Instructions for disassembling the standard downrod pipe.
Steps to reassemble the downrod with a new pipe.
Crucial safety advice for exact downrod assembly and verification.
To Next Page
