Hunter AirMax HP980 - Cleaning and Maintenance; Electrical Shock Hazard Warning

Press the On/Off button to turn your air purifier on or off.
Press the Speed button to select Low, Medium, High, or Turbo fan
speed. Selected speed will display above the Speed button. (1)
Low provides the best product sound, (2) Medium offers moderate
cleaning, (3) High provides strong cleaning power, and (4) Turbo
provides maximum cleaning power.
To use timer function, select desired fan speed and press Timer
button to select between 1-12 hours of operation. Selected time,
in hours, will display above the Timer button. Your air purifier will
turn off after specified time.
When Sleep Mode is activated by pressing the Sleep Mode button,
your air purifier will operate on Low for 8 hours and lights will turn
off. After 8 hours, your air purifier will change back to original
settings and lights will come back on.
Cleaning and Maintenance
7
CHECK AND CLEAN:
Note: This guide covers several air purifier models. Your model may have some or
all of the features listed.
CLEANING EXTERIOR:
Clean unit with a moistened soft cloth only. DO NOT pour or splash water on the
unit or use any abrasive-type cleaner on it. Clean all external surfaces, especially
the air intake grills and air outlet.
NOTE: Ensure the air purifier is completely dry before plugging into power outlet
and turn ON. Failure to do so could cause damage to the filters or air purifier.
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or electrical shot.
WARNING
Press the Auto button to turn on Auto Mode. Auto Mode
automatically adjusts fan speed based on air quality. If air quality is
good (low VOC and particle levels) Low Speed is used. If air quality
is bad (high VOC and particle levels), Turbo Speed is used.
Press the accent light button to turn the light on or off.
Your air purifier is programmed to indicate the VOC and Particle
levels in your indoor environment. A green light indicates good air
quality (low VOC and particle levels). A red light indicates bad air
quality (high VOC and particle levels). If light is red, we recommend
turning your air purifier to Turbo or Auto Mode.