Need help?Do you have a question about the Hunter Dante and is the answer not in the manual?
Describes the most common mounting method, recommended for higher ceilings.
Details steps for installing on concrete ceilings, including drilling and measurement.
Provides instructions for non-concrete ceilings, including drilling pilot holes.
Warning that an insecurely tightened setscrew can cause the fan to fall.
Notes an additional "L" terminal for separate light kit control.
Warning about securely attaching the upper switch housing and potential falling.
Warning about securely attaching the lower switch housing and potential falling.
Instruction to turn the power ON after installation.
Details the first option for cradle installation using screws.
Details the second option for cradle installation using an adhesive strip.
Instruction to slide the remote into the cradle when not in use.
Advice on cleaning and maintaining the fan's finishes to prevent damage.
Advice on cleaning and maintaining the fan blades, including wood finish and painted blades.
Addresses issues where the fan does not turn on or move.
Addresses issues related to the fan operating with excessive noise.
Addresses issues where the fan exhibits excessive wobbling.
To Next Page
General
