Need help?Do you have a question about the Hunter DUAL 48M and is the answer not in the manual?
Explains the advantages of DUAL decoder systems, including wire savings, flexibility, and lightning resistance.
Instructions for installing the DUAL48M module alongside ICM-600 modules in the I-CORE controller.
Discourages and explains the risks associated with using pre-existing wire for decoder installations.
Diagram showing a single run of two-wire path with multiple decoders connected.
Diagram showing two separate two-wire paths originating from the controller.
Detailed steps for programming individual decoder stations using the DUAL module.
Specific guidance on installing DUAL-S surge arrestors for system protection against lightning.
Measures and displays real-time current readings of solenoids operating on the two-wire path.
Activates a single station's solenoid to help identify valves on the site.
Displays station numbers when the controller is operating stations.
Details the use of the ICD-HP programmer for troubleshooting and system setup.
Explains common fault messages displayed by the controller and their meanings.
General| Brand | Hunter |
|---|---|
| Model | DUAL 48M |
| Category | Control Unit |
| Language | English |
To Next Page
