15
C30
E1
Go to step
on page 18
to attach grill.
C27
I
C28
ON
OFF
C29
EXISTING FAN
D11
E
D12
Secure the motor by tightening the 2 screws.
Test the motor. If the motor does not run,
check the plug connection.
Turn on the power source.
Existing Construction – accessible only from below
Remove an existing fan and check to make sure the
opening is large enough to accommodate the new
motor housing (9”x 9.75”).
Move the housing into position above the ceiling
41722-01 R20200515
To Next Page
Loading...
