Hunter H356 - Page 70

PART NUMBER 406796 DATE REVISION:
ITEM QUANTITY WIRE SIZE UPPER END LOWER END
1 STD HEADSTAY 1 9/32" (7mm) 1x19 MARINE EYE 13.881M 45 ft. 6-1/2"
JAW TOGGLE LOOSE, 1/2" PIN
2 STD V1 2 5/16" (8mm)1x19
RIGGING TOGGLE JAW W/ 1/2" PIN 5.334M 17 ft. 6"
TURNBUCKLE 9-16- 16, TOGGLE FOR 1/2" PIN
3 STD V2 2 5/16" (8mm) 1x19
RIGGING TOGGLE JAW W/ 1/2" PIN 4.318M 14 ft. 2"
MARINE EYE w/ 1/2" PIN
4 STD D1 2 5/16" (8mm)1x19
841-1/4" SHROUD TERMINAL 4.791M 15 ft. 8-5/8"
TURNBUCKLE 8-12- 12 W/ JAW TOGGLE FOR 3/8" PIN
5 STD D2 2 7/32" (6mm) 1x19
GIBB 740-3/16 T- HOOK SHROUD TERMINAL 4.14M 13 ft. 7"
TURNBUCKLE 6-12- 12, W JAW TOGGLE W/ 3/8" PIN
6 STD D3 2 9/32" (7mm) 1x19
841-1/4" SHROUD TERMINAL 4.166M 13 ft. 8"
MARINE EYE w/ 1/2" PIN
7 STD RD1 2
3/16" (4.75mm) 1x19
RIGGING TOGGLE JAW 3.569M 11 ft. 8-1/2"
GIBB T-BALL SHROUD TERMINAL TURNBUCKLE 6-10- 10
8 STD RD2 2
3/16" (4.75mm) 1x19
RIGGING TOGGLE JAW W/ 3/8" PIN
4.223M 13 ft. 10-1/4"
GIBB T-BALL
SHROUD TERMINAL TURNBUCKLE 6-10- 10
OPT/STD LENGTH
356 SELDEN STANDARD MAST STANDING RIGGING
PAGE 50A