7
Put the blade washers, found in the hardware bag, onto the
blade screws, found in the hardware bag. Then install the
blade screws to secure each blade to a blade iron.
Repeat x6
x18
x18
Blade Screw
Washer
Fan style may vary.
Note:
x2
Lift the canopy into place so that
the screw holes are aligned.
Insert the two canopy screws
found in the hardware bag.
F
i
t
t
h
e
c
a
n
o
p
y
i
n
p
l
a
c
e
a
s
s
h
o
w
n
.
bag
Canopy Screw
Lightly attach the blade arms to the motor with screws
found in the hardware bag, then securely tighten
after both screws are attached.
Repeat x6
x12
Blade Arm Screw
IMPORTANT
NOTE: The blade arms should be mounted with
the ridge facing downward. Installing it incorrectly
could result in your fan not functioning.
Ridge
Fan style may vary.
Note:
Installing the Bulbs and Glass
Ceiling Bracket Hanging Fan Wiring Canopy Blades Light Glass/Bulbs Remote
To Next Page
Loading...
Need help?
General