Each time you start the air purifier, it is a good idea to run it on high for a few
seconds for fast, initial cleaning. Then set to medium or low as desired.
Power –
Touch power icon on the sensor pad. This will turn the unit ON and
OFF.
Fan Speed –
The fan speed can be adjusted at any time by touching the fan
icon on the top of the unit.
(L)
Low – Recommended for use when soft background noise is unwanted.
(M)
Medium – Typical usage setting. Soft background noise is not an issue.
(H)
High – Use when quick, efficient results to a room’s air quality are desired.
Filter Reset –
After changing the filter, press and hold for 3 seconds the filter
reset icon until indicator light is gone to reset the usage timer.
Timer –
Touch timer icon on the sensor pad. Each of the three timer lights
(1) (2) (4)
represents a number of hours. Any combination of timer lights may
be used at one time.
For example:
(1) = 1 hour
(1) (2) = 3 hours
(1) (4) = 5 hours
(2) (4) = 6 hours
(1) (2) (4) = 7 hours
Ionizer – Touch ionizer icon (ion) on the sensor pad to turn on and off the
function.
8
Ionizer Filter Reset Timer Fan Speed Power
Purifier
OPERATING YOUR AIR PURIFIER:
To Next Page
Loading...
Need help?
General
