www.HunterFan.com
1.888.830.1326
Light Kit
Make sure the lower switch housing is securely attached to
the upper switch housing. Failure to properly secure all three
assembly screws could result in the light xture falling.
Connect the plugs from the upper and lower
switch housings. Make sure to line up the
colored markings on the connectors. Lift the
lower switch housing until its screw holes
are aligned with the screw holes in the upper
switch housing.
Install the three switch housing screws,
found in the hardware bag. Tighten all
three screws.
14
M3641-01 • 12/20/16 • © 2016 Hunter Fan Company
To Next Page
Loading...
Need help?
General