EasyManua.ls Logo

Hunter HFR15D-E - Grounding Instructions

Hunter HFR15D-E
10 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
GROUNDING INSTRUCTIONS
5
81609-01 R20150420
This appliance is for household use only and may be plugged into
any 120-volt AC electrical outlet (ordinary household current). DO
NOT use any other type of outlet.
WARNING: This unit is suitable for grounded receptacle use only.
The cord has a grounded plug as shown in Figure 1. An adapter,
as shown in Figure 2, is available for connecting three-blade
grounding-type plugs to two-slot receptacles. The green grounding
lug extending from the adapter must be connected to a permanent
ground such as a property grounded outlet box. The adapter
should not be used if a three-slot grounded receptacle is available.
NOTE: The adapters ARE NOT supplied with this heater. Read,
follow, and save the instructions that are included with the adapter
you choose.
LINE CORD SAFETY TIPS
1. NEVER pull or yank on the cord or the appliance.
2. To insert plug, grasp it firmly and guide it into the outlet.
3. To disconnect the appliance, grasp the plug and remove it from
the outlet.
4. Before each use, inspect the line cord for cuts and/or abrasion
marks. If any are found, the appliance should be serviced and
the line cord replaced. Please return it to our Service
Department or to an authorized service representative.
5. NEVER wrap the cord tightly around the appliance, as this
could place undue stress on the cord where it enters the
appliance and could cause it to fray and break.
6. DO NOT operate appliance if the line cord shows any damage,
if the appliance works intermittently or stops working entirely.
Figure 1
Figure 2
Grounded
Plug
Grounding
Pin
Grounded Outlet
Box Cover
Adapter
Grounding
Means
Metal
Screw
Grounded Outlet
Box Cover

Related product manuals