EasyManua.ls Logo

Hunter L401 - Page 26

Hunter L401
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
22
5. Regular Maintenance L401 & L404 OPERATION INSTRUCTIONS
MAINTENANCE
SCHEDULE
PERFORM THE FOLLOWING MAINTENANCE
Annually
The entire lift should be inspected yearly (more frequently for severe use applications)
by your factory authorized service representative.
Every Two
Years
Change hydraulic fluid. Use 4 gallons (15 liters) of Dexron II or III transmission fluid.
NOTE: Oil must be filled when the lift is in its fully lowered position.
Drain fluid from reservoir by removing magnetic plug on front of reservoir with the lift
lowered completely.
Clean any metal particles that may be on the plug before replacing.
NOTE: The suggested maintenance above is for normal working
conditions. Equipment exposed to unusually dirty or harsh
corrosive conditions such as heavy winter road salt may
require more frequent maintenance and service.
If any of the conditions described above are observed before, during, or after
operation of the lift, the operator shall stop using the lift and report the condition to
the supervisor, employer or owner. The lift shall not be used until the cause of the
problem has been determined and the appropriate repairs have been made by
qualified automotive lift personnel.

Related product manuals