Hunter Loflin User Manual

7
1886
1886
Installing the Glass
Assembling the Light Kit
Installing the Canopy
x2
Lift the canopy into place so that
the screw holes are aligned.
Insert the two canopy screws
found in the
hardware bag.
F
i
t
t
h
e
c
a
n
o
p
y
i
n
p
l
a
c
e
a
s
s
h
o
w
n
.
bag
Canopy
Screw
Installing the Blades:
Ceiling Bracket Downrod Hanging Fan Wiring Canopy Blades Light Glass Remote
x14
bag
Blade Iron Screw
Lightly attach the blade irons to the motor with screws found in the hardware bag,
then securely tighten after both screws are attached. Repeat this step for each blade
assembly.
Place each blade between a blade iron and medallion. Install three blade screws,
found in the
hardware bag, to attach the medallion to the blade iron. Repeat this
step for each blade.
Repeat x7
Repeat x7
x21
bag
Blade Screw
Ridge
IMPORTANT
NOTE: The blade arms should be mounted with
the ridge facing downward. Installing it incorrectly
could result in your fan not functioning.
IMPORTANT
NOTE: Follow the instructions on the blade. Installing
it incorrectly could result in your fan not functioning.
Remove instructional label after installation.

Hunter Loflin Specifications

General

Brand	Hunter
Model	Loflin
Category	Fan
Language	English