Hunter Milstream - Installing the Canopy; Installing the Blades

7
1886
1886
Installing the Canopy
x2
Lift the canopy into place so that
the screw holes are aligned.
Insert the two canopy screws
found in the hardware bag.
F
i
t
t
h
e
c
a
n
o
p
y
i
n
p
l
a
c
e
a
s
s
h
o
w
n
.
bag
Canopy Screw
Ceiling Bracket Downrod Hanging Fan Wiring Canopy Blades Light Remote Troubleshooting
NOTICE
If screw holes do not align
properly then rotate the canopy
180 degrees. Hanger ball shape
must match canopy opening for
correct canopy installation.
Installing the Glass
Assembling the LIght Kit
Fan style may vary.
Note:
Installing the Blades:
Attach each blade to a blade iron using the blade washer, found in the hardware
bag, and the blade assembly screws, found in the hardware bag.
Repeat x2
x6
Blade Screw
x6
Blade Washer
bag
bag