English, Swedish, Norwegian, Danish, Finnish, German
Imprints of programmed camera ID, moon phase,
temperature, date, and time on photo.
Alkaline/ NI-MH
Select correct battery type used in the camera, this
makes the camera perform better.
50Hz/ 60Hz – improper setting may cause camera
screen flicker
Select “ON”, press “OK”, camera will continue to store
photos/videoclips by deleting earliest photos/videoclips.
Select “ON”, press “OK”, to enable password protection
for your camera; support totally 6 digits/ alphabets long
password access.
Select “Yes” to reset camera back to factory default
settings.
With update firmware in the SD card, you can enter this
menu to update camera firmware by confirming “Yes” in
the options.
Install camera with Hunter SIM or other brand SIM card,
it will display a unique QR Code. Use the APP to scan
the QR code for adding the camera to your APP
account.
Firmware version in camera (Version/ IMEI/ MCU/ MOD)