Hunter Pacer User Manual

7
1886
1886
Installing the Blades:
Ceiling Bracket Downrod Hanging Fan Wiring Canopy Blades Light Bulbs TroubleshootingRemote
Installing the Canopy
x2
Lift the canopy into place so that
the screw holes are aligned.
Insert the two canopy screws
found in the hardware bag.
F
i
t
t
h
e
c
a
n
o
p
y
i
n
p
l
a
c
e
a
s
s
h
o
w
n
.
bag
Canopy Screw
Repeat x6
x18
bag
Blade Screw
Secure each blade to a blade iron as shown using the blade nuts, found in the
hardware bag, and the blade assembly screws, found in the hardware bag.
x18
bag
Blade Nut
Repeat x6
x12
bag
Blade Arm Screw
Lightly attach the blade arms to the motor with
screws found in the hardware bag, then
securely tighten after both screws are attached.
Fan style may vary.
Note:
Fan style may vary.
Note:
IMPORTANT
NOTE: Follow the instructions on the blade. Installing it
incorrectly could result in your fan not functioning.
IMPORTANT
NOTE: The blade arms should be mounted with
the ridge facing downward. Installing it incorrectly
could result in your fan not functioning.
Ridge

Hunter Pacer Specifications

General

Brand	Hunter
Model	Pacer
Category	Fan
Language	English