8 | P a g e
PARTS FUNCTION
Instruments and Indicators
1. Speedometer
2. Temperature Gauge
3. Left Turn Indicator
4. Neutral Gear Indicator
5. Fuel Contents Gauge
6. Right Turn Indicator
7. Water Temperature Alarm Indicator
8. EFI Light
Always note your instruments while riding.
Ignition Switch
The Ignition Switch is located on the right side of the chassis in front of the Tank.
1. When the Ignition Switch is in the vertical position, the circuit is in the “Off” position, the
engine can not be operated and the key can be taken out.
2. Open the Ignition Switch Dust Cover; insert the Ignition Key, then press inwards and turn
the key 90 degree clockwise. The circuit is now in the “ON” position. In this position the key
can be removed and the engine can be started.
3. If you rotated the key 90 degrees anti-clockwise, the circuit is in the “Park” position. In this
position the key can be removed and the motorcycles park lights can be activated however
the engine can not be started.
Steering Lock
The Steering Lock is below the Steering
Stem. To lock the steering, turn the
Handlebars all the way to the left, insert the
key into the lock, apply slight pressure
inwards while turning the key clockwise and
then remove the key.
It is a wise practice to always leave the
steering in the “locked position” when the
motorcycle is not in use.
Left Handlebar Controls
1. Horn Button
2. Turn Signal Switch
3. Headlight Beam Switch
4. Left Hand Grip
5. Clutch Lever
6. Passing Switch (Yellow)
Horn Button
Press the horn button to sound the horn if
necessary.
To Next Page
Loading...