Hunter Road Force Touch GSP9700 Series - Hood Proximity Switch Operation and Adjustment; Verify and Adjust Hood Switches

43
6. Select “Keys and Switches” from the Diagnostics screen.
7. Starting with the hood in the open position, the down switch should emit a short beep as the hood
approaches the closed position.
Figure 75
8. Starting from the hood-closed position, the up switch should emit a short beep as the hood approaches the
opened position.
9. If the hood proximity switches do not operate correctly, the switches may be adjusted as follows:
• Loosen the two screws securing the proximity switch to the balancer.