Need help?Do you have a question about the Hunter TC33 Series and is the answer not in the manual?
General| Brand | Hunter |
|---|---|
| Model | TC33 Series |
| Category | Tyre Changers |
| Language | English |
Provides an overview of the operation instructions and information for the TC series tire changer.
Details hazard definitions and symbols used to identify safety-related information.
Details the procedure for loosening tire beads using the PowerOut feature on the TC33 model.
Explains the function and operation of the optional wheel lift pedal on the TC33 model.
Describes how to use the wheel rotation pedal to control wheel movement.
Details the operation of the two-stage air inflation pedal for tire inflation.
Explains the role of the inflator and pressure limiter for safe tire inflation.
Describes the function and operation of the optional bead press arm.
Explains the use of the optional bead press arm with a horizontal roller on the TC33 model.
Details the operation of the command unit for bead roller control on the TC33M model.
Identifies and labels the main components of the TC33 tire changer.
Step-by-step guide for loosening tire beads using the side shovel on the TC33 model.
Instructions on how to properly position and secure wheels on the tire changer.
Procedure for loosening tire beads using the rollers on the TC33M model.
Detailed steps for removing standard tires from a rim.
Procedure for mounting a standard tire onto a rim.
Specific instructions for mounting difficult low profile tires.
Step-by-step guide for inflating tires and seating beads.
Instructions on how to safely remove a wheel from the tire changer.
Detailed methods for demounting tires, including special considerations.
Advanced techniques for mounting tires, covering various tire types.
Specific procedures for loosening beads on challenging tires for the TC33M.
Advanced demounting techniques for the TC33M, including specialized tools.
Advanced mounting techniques for stiff sidewall tires on the TC33M.
Procedure for mounting stiff low profile tires on rounded edged rims using rollers on TC33M.
Procedure for matching and optimizing tire and rim to minimize vibrations on TC33M.
Details the daily maintenance tasks required for the tire changer.
Lists essential replacement parts and their quantities for maintenance.
Procedure for calibrating and adjusting the column position for accurate operation.
Steps to check and adjust bead rollers for proper alignment and function.
Procedure for checking and adjusting the position of the bead breaker arm.
To Next Page
