Need help?Do you have a question about the Hunter TCX50H Series and is the answer not in the manual?
General| Brand | Hunter |
|---|---|
| Model | TCX50H Series |
| Category | Tyre Changers |
| Language | English |
Introduces the operations manual for the TCX50H tire changer family.
Outlines hazard definitions and general safety warnings for equipment operation.
Details essential warnings, instructions, and precautions for safe equipment use.
Details electrical warnings, voltage, and amperage rating requirements.
Covers power source, installation, equipment specs, and symbol explanations.
Specifies air pressure requirements and safety limits for tire inflation.
Addresses specific procedures for unique rim and tire designs.
Defines the proper scope and limitations for the tire changer's operation.
Outlines training requirements and essential pre-operation checks for the tire changer.
Covers safe operation during use and explains control pedal functions.
Details bead breaker controls and wheel clamping pedal operation.
Explains air inflation, moving part hazards, and the pressure limiter function.
Describes the function and types of the mount/demount head.
Identifies and labels the main components of the tire changer.
Explains the process and safety precautions for breaking tire beads.
Details how to properly position and clamp wheels on the turntable.
Provides step-by-step instructions for removing standard tires from rims.
Covers the procedure and safety warnings for inflating tires.
Explains how to safely remove the wheel from the clamping device.
Describes the use and configuration of optional clamping jaw extensions.
Details specific techniques for bead breaking on "AH" wheels.
Explains advanced methods for demounting tires, especially stiff sidewalls.
Provides a checklist and steps for proper tire mounting.
Covers changing the mount/demount head and calibration for steel heads.
Introduces the optional BP Bead Press Arm for mounting/demounting tires.
Identifies the functional parts of the BP Bead Press Arm.
Details the procedure for clamping a wheel using the BP Bead Press Arm.
Explains how to use the BP Bead Press Arm for tire demounting.
Describes using the bead press head hook to lift the tire during demounting.
Details the steps for mounting tires using the BP Bead Press Arm.
Introduces the optional Bead Press System (BPS) and identifies its parts.
Details clamping procedures and outer bead lubrication using the BPS.
Explains how to demount outer beads and break inner beads with the BPS.
Covers inner bead mounting, general mounting steps, and special procedures for run flat tires.
Describes inspecting and replacing tire sensors using the BPS with the second roller.
Outlines daily, weekly, and periodic maintenance tasks for the tire changer.
Lists required maintenance parts and their corresponding part numbers.
Illustrates and defines various parts and measurements of a wheel rim.
Provides visual examples and descriptions of different rim designs.
To Next Page
