Hunter TCX50H Series - Inflation, Hazards, and Limiter

Operation Instructions for TCX50H Tire Charger
19
1.13 Air Ination Pedal
On the left side of the base, the air ination pedal operates the two-stage air ination system.
Refer to illustrations on page 27. The pedal controls the air going to the ination hose and
the air ination jets.
• EXPLOSION HAZARD
• Never exceed tire pressure recommended by
tire manufacturer. Never mismatch tire size
and rim size.
• Avoid personal injury or death.
DANGER
Keep hands clear of wheel during sealing and seating of beads.
WARNING
Risk of Tire Failure When Driving.
Excessive air pressure can damage the internal structure of a tire, without this
damage being visible to you, resulting in an automobile accident, personal injury or
death.
WARNING
1.14 Moving Parts
• MOVING PARTS PRESENT.
MOVING PARTS CAN CUT AND CRUSH.
• Keep hands away from moving parts.
• Crush may cause injury.
WARNING
1.15 Inator and Pressure Limiter
As a safety device, the pressure limiter prevents the operator from using excessive air
pressure.
Bead seating pressure should never exceed the tire manufacturer’s maximum bead seating
pressure as stated on the sidewall of the tire.
If tires being mounted require more than the tire manufacturer’s maximum bead seating
pressure, the wheel should be removed from the tire changer, placed in an ination cage, and
inated per manufacturer’s instructions.