Hunter TCX50H Series - TCX53 H Operational Supplement; 5.1 General Information and Part Identification

Operation Instructions for TCX50H Tire Charger
42
5. TCX53H Operational Supplement
Bead Press System Operation
5.1 General Information
This chapter contains information for the correct use of the optional Bead Press System
(BPS).
The BPS has been designed as an accessory to help the operator mount the tire on the rim,
or to demount the tire from the rim.
5.2 Part Identication
The functional parts of the Bead Press System are:
1
4
8
3
2
9
7
5
6
1. Articulated Arm 6. Tire Lifting Disc
2. Rim presser cone 7. Sliding locking lever
3. Control Lever 8. Rotating locking pin
4. Bead presser roller 9. Arm end of travel pin
5. Arm releasing lever