10
42030-01 • 07/27/11 • Hunter Fan Company
Step 5-1
Screw
Step 5-2
Step 5-3
Hanger
Bracket
Canopy
Screw
5-1. Loosen the two canopy screws in the bottom of the hanger
bracket.
5-2. Align the two keyholes in the canopy with the two partially
installed canopy screws. Rotate to engage the screws in the
narrow ends of the keyholes and securely tighten the screws.
5-3. Align the holes in the canopy cover with the canopy screws. Twist
the canopy cover clockwise until it locks into place, hiding the
canopy screws.
5 • Installing the Canopy
To Next Page
Loading...
