Hunter Vivien - Assembling and Installing the Light; Installing Bulbs and Glass Shades

7
8
1886
1886
Ceiling Bracket Downrod Hanging Fan Wiring Canopy Blades Light Remote Troubleshooting
Installing the Canopy
x2
Lift the canopy into place so that
the screw holes are aligned.
Insert the two canopy screws
found in the hardware bag.
F
i
t
t
h
e
c
a
n
o
p
y
i
n
p
l
a
c
e
a
s
s
h
o
w
n
.
bag
Lightly attach the blade arms to the motor with
the blade arm screws, then securely tighten
after both screws are attached.
Canopy Screw
Repeat x4
Fan style may vary.
Note:
Installing the Blades:
x12
x12
Insert grommets found in the hardware bag into the
holes in the blades, then secure each blade to a blade arm
with screws found in the hardware bag.
Repeat x4
bag
bag
Blade Screw
Grommet
IMPORTANT
NOTE: Follow the instructions on the blade. Installing it
incorrectly could result in your fan not functioning.
Assembling the Light
Fan style may vary.
Note:
Installing the Bulbs and Glass
Remember the screws that you
kept after removing the shipping
ring? You need them here.
D
I
S
C
A
R
D
K
E
E
P
x4
bag
Blade Arm Screw