Why doesn't Team 3 beep when pressing the event marker on Huntleigh Measuring Instruments?
If Team 3 does not beep when the mother presses the event marker on the Huntleigh Measuring Instruments, check that the event marker is connected and verify the sound setting.
How to fix superimposed traces (twins) on Huntleigh Measuring Instruments?
When using Huntleigh Measuring Instruments for twins, if you see only one trace or the traces are superimposed, check the ‘Printer Offsets’ in Printer setup.
General| Type | Fetal Monitor |
|---|---|
| FHR Range | 50 - 210 bpm |
| Display | LCD |
| Telemetry | Optional |
| Twins Monitoring | Yes |
| Frequency | 1 MHz |
| Power Supply | Mains/Battery |
| Ultrasound Frequency | 1 MHz |
| Printer | Integrated |
| Power Output | 10 mW/cm² |
List of critical safety warnings for the equipment's use and environment.
Specifies the device's purpose and conditions for use.
Instructions for connecting the device to other equipment and power.
Guidance on connecting patient interface devices correctly.
Steps for powering the fetal monitor on.
Procedure for powering down the fetal monitor.
Steps for connecting and using ultrasound transducers for FHR monitoring.
Causes and solutions for inaccurate FHR readings.
Procedure for monitoring multiple fetuses using ultrasound.
Procedure for using fetal ECG monitoring with scalp electrodes.
How to use the TOCO transducer for monitoring uterine contractions.
How to use the IUP transducer for monitoring uterine contractions.
Procedure for monitoring maternal ECG to differentiate from fetal signals.
Instructions for performing and interpreting maternal blood pressure measurements.
Procedure for monitoring maternal oxygen saturation and pulse rate.
Recommended actions for different types of alarms.
Methods for managing alarm settings like volume and thresholds.
Purpose and application of the Dawes-Redman analysis feature.
Defines the parameters used for evaluating CTG records.
How the analysis is performed and results are generated.
Steps to start and manage the Dawes-Redman analysis.
Procedure for connecting the wireless telemetry unit.
Common issues and solutions related to Fetal Heart Rate monitoring.
Common issues and solutions related to SpO2 monitoring.
Methods for cleaning and disinfecting transducers and sensors.
To Next Page
