To Next PageTo Next Page
Need help?Do you have a question about the HURNER HST 300 Print 315 2.0 and is the answer not in the manual?
General| Brand | HURNER |
|---|---|
| Model | HST 300 Print 315 2.0 |
| Category | Welding System |
| Language | English |
Ensures proper electrical connection for safe welding operations.
Guidelines on handling cables to prevent damage and ensure safety.
Specifies that only authorized personnel should open the unit for safety.
Mandatory pre-use inspection of safety features and components for damage.
Policy on servicing and repairs by authorized personnel only due to safety sensitivity.
Procedure for powering on the welding unit and initial display sequence.
Steps for connecting the welding terminals to the fitting and ensuring proper contact.
Instructions on using a scanner to read fitting bar codes for welding parameters.
Procedure to initiate the welding process after data input.
Description of how the welding process is monitored and parameters are displayed.
Identification and acknowledgment of welding process failures.
Procedure for manually setting welding voltage and time parameters.
Manual input method for fitting codes, involving entering a string of numbers.
Process of measuring fitting resistance and comparing it to code values.
Functionality of the overheating switch that aborts welding when temperatures are too high.
