HUROM H-101 Series - Juice Chamber Set Assembly Guide; Juice Chamber Assembly Steps

12
④
④
⑦
⑦
⑤
⑤
②
②
①
①
③
③
⑥
⑥
Discharge Cover
Discharge Cover
01
04
Fit the wings of the external strainer (④) to
the grooves of the chamber (③).
Put together the hopper and chamber by
matching the mark on hopper [ ] (⑦)
and the mark on the chamber [ ].
If the inner parts are not assembled properly,
the hopper will not close.
Assembling Juice Chamber Set
Chamber
Chamber
Hopper
Hopper
Out Strainer
Out Strainer
Chamber
Chamber
Out Strainer
Out Strainer
Inner Strainer
Inner Strainer
Screw
Screw
Hopper
Hopper
Assembly Guide
Assembly Guide
Screw Packing
Screw Packing
Assembly Guide
Assembly Guide
Strainer Wing
Strainer Wing
Chamber Groove
Chamber Groove
Assembly Guide
Assembly Guide