HUROM H-101 Series - Ice Cream Chamber Set Assembly Process; Ice Cream Chamber Assembly Process

15
Assembling Ice Cream Chamber Set
※ Assembly Guide with Main Body is in p16.
Chamber
Chamber
Ice Cream
Ice Cream
Strainer
Strainer
Discharge Cover
Discharge Cover
Hopper
Hopper
02
03
Place the ice cream strainer in the chamber.
Wiggle the strainer left and right until the
bump on the strainer fits the groove on the
bottom of the chamber (③).
Make sure the discharge cover (①) of the
chamber is properly fastened with the loop.
1. Close the discharge cover and fasten it with
the loop.
2. If the packing is not properly assembled or
the lever is not properly closed, the lever
may open or, juice may leak during extraction.
05
06
Match the mark [ ] (⑤) on the hopper and
the mark [ ] (②) on the chamber when
putting the parts together.
The hopper will not close if the inner parts are
not assembled properly.
Turn the hopper clockwise up to the mark
[ ] on the chamber.
The hopper will not close if the inner parts
are not assembled properly.