20
If the chamber is not easily separated from the
hopper, separate the hopper, while the chamber is
connected to the main body, and wash the hopper
in running water.
If the hopper does not open easily after use
Set the lever to[ ] (Half Open) position and remove
three times. You will be able to open the chamber
lid easily afterwards.
The chamber packing can't be disassembled.
Do not disassemble the chamber packing.
If you try to disassemble the chamber packing,
it might be damaged.
When you clean the chamber set, wash the residue
inside and bottom of the chamber under running
water.
How to Clean : Chamber Set
Hopper
Chamber
packing
◑
To Next Page
Loading...
