SETUP AND USAGE INSTRUCTIONS
www.PyleUSA.com
7
To adjust the height of the handlebars, unlock the steering tube by
pulling outward on the quick-release lever. Slide the T-tube to the
desired position and secure bypushing inward on the quickrelease
lever.
1
The tension of the quick release clamping mechanism can be adjusted
by tightening or loosening the Allen bolt. Be careful not to over tighten.
You should always be able to open and close the quick-release lever by
hand and the T-tube should telescope freely with the quickrelease open.
2
To Next Page
Loading...
