www.PyleUSA.com
13
MAINTENANCE INSTRUCTIONS
Change Wheel
The wheels wear down with time and can be damaged if overly used on rough surfaces. The back wheel on
which the brake is applied is particularly aected after several hours of braking. In the interests of safety, they
should be checked regularly and changed if necessary.
Change Deck
1. Loosen the 6 screws (A) as shown on the picture (arrows).
2. Remove deck and tighten the screw (A).
3. Check for tight t after you have traveled about 5km with
the new board.
Left Wheel
Turn the Allen Key counter-
clockwise to loosen the screw
Right Wheel
Turn the Allen Key clockwise
to loosen the screw
A A A
A A A
To Next Page
Loading...
