Page-11
All Products limited to Vehicle Tow Rating, see Vehicle Owners Manual. Visit www.huskytow.com for Warranty Information /
Tech Support / Product Updates. 2020 Keystone Automotive Operations Inc. All Rights Reserved. 08/27/2020-Rev8
OPERATING INSTRUCTIONS
From Towing Position to Maneuver Position:
1. Be sure truck and trailer are on even ground and in a straight line.
2. Pull the handle out and rotate forward so that the latching pins are in hole #3 (rear hole).
3. Apply a tug test. This consists of applying the trailer brakes and slowly driving the truck forward
until the Husky Roller moves rearward and the latch pins fully engage in hole #4 in both roller
tubes.
4. Check both latch pins for full engagement.
From Maneuver Position to Towing Position:
1.Be sure truck and trailer are on even ground and in a straight line.
2. Pull the handle out and rotate rearward so that the latching pins are in hole #2 (front hole).
3. Apply a tug test. This consists of applying the trailer brakes and slowly driving the truck rearward
until the Husky Roller moves forward, and the latch pins fully engage in hole #7 in both roller tubes.
4. Check both latch pins for full engagement
To Next Page
