11 HUSKYTOOLS.com
Please contact 1-888-43-HUSKY for further assistance.
Pre-Operation (continued)
TYPICAL COMPRESSED AIR DISTRIBUTION SYSTEM
Part Description
A Drain Legs
B Drain Valves
C Lubricator
D Air Tool
E Regulator
F Filter / Moisture Trap
G Air Usage Lines
H Dirt Legs
I Air Discharge Valve
J Feeder Lines Slope with Air Flow
K
Main Distribution Air Lines - Slope pipe
in direction of air flow. Water condensate
flows along bottom of pipe to drain legs,
preventing it from entering feeder lines.
Part Description
L 5 Micron Filter
M .01 Micron Filter
N Spray Gun
O Ball Fitter
P Flexible Coupling
Q
For Best Performance - The distance
between the compressor and the moisture
trap should be as long as possible.
R Air Flow
To Next Page
Loading...
