Husky GS05403-1D - Connecting Units and Work Surface

Assembly (continued)
BB
X 2
AA
X 4
each side
DD
X 4
each side
CC
X 4 each side
CONNECTING THE WALL CABINET TO THE CABINETS NEXT TO IT
Wall
INSTALLING WORK SURFACE
N
X 2
EE
X 4
If the base cabinets
have casters, use it.
If the base cabinets
have adjustable feet,
use it.
8
9
WWW.HUSKYTOOLS.COM
Please contact 1-888-HD-HUSKY for further assistance.
11
Connect the wall cabinet as shown and tighten securely with four screws (AA),
four nuts (CC) and four washers (DD) for each side.
Attach the wall cabinet to the stud inside the wall with two screws (BB) each
to avoid the cabinet accidentally falling off.
Insert two L brackets (N) into the slots on the locker side and attach them
with four plastic nails (EE).