Husky GS05403-1D - Assembly; Installing Feet and Grommets

Assembly
INSTALLING THE GROMMETS
KK
After installation
1 2
3 4
INSTALLING THE ADJUSTABLE FEET OR LEVELERS
CAUTION: Please wear gloves during the whole
assembling process.
1
2
GG
X 4 each
A
B
B
A
C
C
D
D
HH
X 4 each
AA
X 16 each
7
WWW.HUSKYTOOLS.COM
Please contact 1-888-HD-HUSKY for further assistance.
For base cabinet, attach the feet (HH) to the bottom using sixteen screws (AA) and tighten securely.
Make sure side A of the adjustable feet (HH) is facing either towards the back or the front of the cabinet.
For locker, attach four levelers (GG) directly to the bottom.
Front
Back
View from under
the cabinet
Use the short side of the hex wrench to pry out the knock-outs of your desired cord access holes.
Then install the grommets (KK) into those holes.